TANDBERG MCU, Руководство пользователя

Страница: 24 / 65

24
TANDBERG MCU Using the MCU
Encryption Mode This settings only applies if ‘Encryption’ is selected (see above).
Auto will use the highest level of encryption available on each of the participants
connected in the conference. This means that there can be a mix of DES and
AES encrypted connections in the same conference.
AES 128 will only allow participants with AES 128* bit encryption capabilities.
Participants without this capability will not be able to join the conference.
DES will only allow participants with DES 56 bit encryption capabilities.
Participants without this capability will not be able to join the conference.
Participants
Video Participant Limit Defines the maximum number of Video Participants allowed in the conference.
Telephone Participant Limit Defines the maximum number of Telephone Participants allowed in the
conference.
Welcome Picture and Sound When selected, a Welcome screen and audio message will be shown to each
new participant of the conference.
Entry and Exit Tones When selected, a tone signal will be heard each time a participant is entering or
leaving the conference.
Add Participants
Selecting ‘Add Participants’ will create a conference with the above-specified configuration and at the same time,
the MCU will open the ‘Add Participants’ page. Here the conference administrator can add participants from the
phone book or manually dial one.
Create Only
Selecting ‘Create Only’ will create a conference with the above-specified configuration, without dialing out to any
participants.
Cancel
Selecting ‘Cancel’ will discard all changes made and return to the ‘Conference Overview’ page.
* Optional feature on all DES encryption capable TANDBERG endpoints
T
HE WELCOME SCREEN AND SOUND CAN BE CUSTOMIZED IN THE
‘F
ILE
M
ANAGEMENT
’
SECTION UNDER
‘C
ONFIGURE THE
MCU’.
TIP