background image

TANDBERG 8000 MXP 

ii 

 

 

CAUTION! 

 

Avoid displaying the same images continuously over a long period 
of time on the monitors. 

 
Displaying the same images such as still images for a long time may cause after-image 
lagging. This may occur in the following two cases: 
 

1. After image lagging due to remaining electrical load 
 

When image patterns with very high peak luminance are displayed for more than 1 minute, 
after-image lagging may occur due to the remaining electric load. The after-images remaining 
on the screen will disappear when moving images are displayed. The time for the after-images 
to disappear depends on the luminance of the still images and the time they had been 
displayed. 
 

2. After-image lagging due to sticking 
 

When images of the same pattern are displayed continuously for several hours or displayed 
for a short period of time every day, after-images may remain on the screen due to the 
sticking of the fluorescent materials. In this case, these images may decrease if moving 
images are displayed after them, but basically they will not disappear. 
 

Solving after-image lagging problems 
 

If you have got after-image lagging on your monitors, you can reduce the problem to an 
acceptable level by displaying a white image on the monitors for a few hours. This can be 
accomplished by focusing the camera towards a white paper and setting maximum 
brightness. See the ‘User Manual’ for details. 
 
NOTE: Warranty may be invalidated if the precautions listed above are not followed. 
 

Содержание 8000 MXP









































































































































































































































































































































Отзывы: