Installation
TANDBERG IBM Lotus Notes/Domino v 11.3 - Installation & getting started guide
Page 13 of 49
Figure 4: The Files tab, with the two TANDBERG templates highlighted
3. Right-click on the templates and select
Sign…
a. Choose
Active User’s ID
to sign using the current user’s ID.
b. Make sure that the user has sufficient permissions to sign templates and that the user has a
mailbox on this Domino server.
4. Select the
All design documents
radio button.
5. Click
OK
.
The status bar shows the number of databases processed and the number errors if any occurred.
See the Domino Server logs for additional information if any errors occur.
You will get a Cross Certificate Warning if /TANDBERG is not recognized as a trusted
organization. This should be handled according to your organization policies.
Creating the TMS Resource Reservation Database
Open Domino Administrator and select the server hosting the installation files. Go to the
Administration
menu and select
Full Access Administration
.
If you cannot get full access, permissions can be granted to the server: go to the
Configuration
tab
for the server and select
Current Server Document
. In the
Security
tab modify the
Full Access
Administrators
field (see Figure 5: Adding the user Id of the user completing the installation to the
Full Access Administrators
field). Add the user ID of the user completing the installation and save
and close the server document. (You may have to close and reopen your Administrator session to
update your permissions.)
