Tanco E100 SA, Руководство оператора, Страница: 40 / 88

Tanco Autowrap - E100
Operator’s Manual
39
Area Problem Remedy
Film Cut and Start
contd.
Cut and start is closed
before film is gathered
The diverter valve on the tipping frame is activated too soon. Change the bolt to a lower hole in the link.
Bale is tipped off before
film is cut.
Diverter valve is activated too late. Move the bolt to a higher hole in the link.
Film is not cut cleanly Check condition of blade.
Film Dispenser Film not wrapping evenly
on to bale.
Adjust the film dispenser height so the centre of the film is in line with the centre of the bale.
Film breaking while wrap-
ping.
Check for damage on the roll of film.
Check for damage on the film dispenser rollers.
Check film dispenser gears are rollers are rotating freely.
Wrapping Drive roller and bale not
turning.
Check the shear bolt on the driver roller sprocket. If sheared replace with an M8 X30 grade 8.8 bolt.
9. TROUBLESHOOTING