Tanco E100 SA, Руководство оператора, Страница: 23 / 88

Tanco Autowrap - E100
Operator’s Manual
22
Swivel Axle - Working Position
The right hand wheel has two fixing positions (See Fig. 6.12 & 6.13). The wide position is used in the field to give good
stability for loading. The narrow position is used to reduce the overall width of the machine for road transport.
To change the wheel position from working position (P1) to the transport position (P2) , remove the Linch pin from the
locking pin (4). Rotate the wheel so the wheel mounting rotates on pivot pin (3) Refit the locking pin and Linch pin.
Once the wheel has been rotated to its’ working position (P2) Refit the locking pin and Linch pin.
6. MACHINE SETUP
Transport
Position
Swivel
Axle
1
2
P1
4
3
Transport
Position
Swivel
Axle
1
2
P2
4
3
Fig. 6.12
Fig. 6.13