Tanco E100 SA, Руководство оператора, Страница: 30 / 88

Tanco Autowrap - E100
Operator’s Manual
29
Channel 4 - Grand Total
When the bale wrap is complete, the grand total is automatically advanced by 1.
The grand total cannot be reset.
Press to select
Grand total displays for 5 seconds then defaults to
channel 1.
Channel 5 - Bale Wrapping Rate
Displays number of bales wrapped per hour. The time period over which the rate is
averaged may be re-started at any time.
Press to select
Press to select
Press and hold for 5 seconds.
Channel 6 - Bale Wrapping Speed
Displays instantaneous rpm of the bale wrapper at 3 second intervals in the range 10-99 rpm
An overs-peed alarm will sound if the rpm exceeds a pre-programmable limit. The display
will default to this channel and flash for the duration of the over-speeding, subsequently
reverting to the ‘current/target wraps’ display.
Press to select
Program the Overspeed Alarm
Switch power on while pressed
Release
The 3rd digit flashes
Hold to cycle to the desired digit, then release, otherwise press
once…
The fourth digit flashes
Hold to cycle to the required digit.
7. CONTROLLER INFORMATION