Tanco E100 SA, Руководство оператора, Страница: 15 / 88

Tanco Autowrap - E100
Operator’s Manual
14
6. MACHINE SETUP
Hitching the Machine (See Fig. 6.1)
Before attempting to hitch the wrapper to the tractor remove the lower links of the tractor to avoid them touching the drawbar (1). The machine can be hitched to the tractor using the
towing hook of the tractor. Prior to hitching to the tractor the correct height of the hitch eye (2) must be determined. Please note that the drawbar can be turned upside down (See Fig
6.2) to accommodate a high or low attachment level, height adjustment can also be achieved by choosing one of three heights when connecting drawbar to the Chassis front adjustment
plate (3). There are three types of drawbars available with this machine providing three hitching options depending on the tractor towing mechanism; Standard Hitch (shown), Clevis
Hitch & High Hitch. Once an appropriate hitch height has been determined the Chassis height can be raised and lowered by turning the handle on the jack (1) clockwise and anti-clock-
wise respectively. Once the machine has been hitched to the machine fully re-tract the jack by turning the handle clockwise.
Never stand between the tractor and the machine during hitching and ensure both the tractor and machine are prevented from rolling away.
B
3
2
1
4
645
365
Fig. 6.1
Fig. 6.2