Tanco E100 SA, Руководство оператора, Страница: 29 / 88

Tanco Autowrap - E100
Operator’s Manual
28
Channel 2 - Store Totals
When bale wrap is complete, one of eight pre-selected memory store totals; A, b, C, d, E,
F, G, or H, is automatically advanced by 1. Store totals can be reset individually.
Press to select
The fourth digit displays the current store designation
for 2 seconds.
The current total for that store then displays for five
seconds, then defaults to channel 1.
Press to select
Select the desired store total (A – H)
This is now the default store, and subsequent bale
counts are stored there until another store is selected.
Press to select
Select the desired store total (A – H)
Press and hold.
Channel 3 – Part Total
When the bale wrap is complete, the part total is automatically advanced by 1. The part total
can be reset at any time
Press to select
Part total displays for 5 seconds then defaults to
channel 1.
Press to select
Press and hold for 5 seconds.
7. CONTROLLER INFORMATION