Tanco E100 SA, Руководство оператора, Страница: 34 / 88

Tanco Autowrap - E100
Operator’s Manual
33
Fig. 8.1
Details of Hydraulics
The E100 machine is controlled by a 3 bank levers and cable operated valve. The levers are mounted in the
tractor cab. This valve directly controls the loading, turntable and tipping functions, the remaining function,
the film cut and start is automatically activated. The cutter is closed automatically during tipping by a linkage
operated diverter valve on the tipping frame. The cutter is automatically opened during wrapping by an elec-
tric popper valve activated by the controller.
Control Levers.
Lever 1 operates the Load Arm function, pull the lever to raise the arm, push the lever to lower the arm. Put the
Load arm safety pin in the working position before moving the arm.
Note: Make sure the turntable is turned to a position with roller parallel to the load arm before the arm is
raised, if it is at an angle the arm can come in contact with the table.
Lever 2 operates the turntable rotation function, pull the lever for forward rotation, push the lever for slow
reverse.
Note: Make sure the load arm is the lowered position before the table is rotated.
The E100 has as standard the turntable autostop facility. This means that the turntable lever has only to be
held for one revolution of the turntable, after that the lever is held engaged electrically by the control unit. It
will automatically release the lever when the pre-set number or wraps is reached. The autostop can be overrid-
den and the turntable stopped at any time by pushing the lever back into the central position.
Lever 3 operates the turntable tipping function. Pull to tip, push to lower.
Note: Make sure the turntable is in the correct tipping position before attempting to tip. If the table is at an
angle it can come in contact with the wheel mountings when tipping. The tipping position for the turntable
is when the cut and start is to the front. It is best to take the turntable slightly past the tip position and then
reverse slowly to the stop. The turntable stop prevent it being turned when tipped.
1 2 3
8. ELECTRO-HYDRAULICS