Tanco Autowrap - 1310 / 1320
Operator’s Manual
8
- Squeeze Danger Between the Stationary Arm & Wrapping Arm
During the main wrapping process the wrapping arm moves around a stationary arm. Everytime the wrapping arm passes the stationary arm
there is a squeeze danger that can be dangerous for the fingers. The distance between the stationary and the wrapping arm is between
25-40 mm. (See Fig. 4.1).
- Squeeze Danger between the Rollers and the Main Frame
During the wrapping process the bale rotates on two rollers. When the rollers are in motion there is a danger of being squeezed.
- Squeeze Danger between Roller Arms and Main Frame (Inwards)
When loading a new bale, the roller arms move towards the main frame, Beware of the danger. eep clear of this area.
- Squeeze Danger between Roller Arms and Main Frame (Outwards)
When loading or unloading a new bale, the roller arms move outwards. Beware of the danger. Keep clear of this area.
- Squeeze Danger Caused by Plastic Automation
At the end of the wrapping process the plastic is cut and held tight until the start of the next wrapping process. When the cutter arm moves down to lock the plastic, there can occur a
squeeze danger between the cutter arm and the cutter holder. The cutter blade that cuts the plastic is very sharp; ensure to keep hands away from the cutter. (See Fig. 4.2).
Three Point Mounting
When the machine is mounted on the three point linkage, make sure that the lifting arms are tightened up so there is no sideways movement.
Front Mounting
If the machine is mounted on a front loader there must be a counterweight fitted to the three point linkage. It must be large enough
to give the tractor good stability. Connecting heavy working implements often has an overall negative effect on the tractor’s driving
and braking capacity.
Transporting
When transporting on a public road there are certain safety measures that must be taken:
- Ensure the machine is in the transport position.
- Ensure the squeeze arm is fully closed.
- Enure that the wrapping arm is not parked overhanging the sides of the machine.
- Ensure that the lights are connected and functioning correctly
- It is recommended that the film rolls be taken off the dispensers for road transport and put on the film carriers on the drawbar. This reduces stress on the machine and reduces the
danger of the rolls being accidently falling off on the public road.
- The machine is wide (2660mm) even in tranport position, be aware of this especially on narrow roads.
4. SAFETY PRECAUTIONS
Fig. 4.1
Fig. 4.2
Содержание 1300 Series
