Tanco 1300 Series, Руководство оператора

Страница: 37 / 112

Tanco Autowrap - 1310 / 1320
Operator’s Manual
36
1A
1B
1
2
1
3
9. OPERATIONAL FEATURES
Fig. 9.3
Fig. 9.2
Overlap - 1310 EH / S / SM Models
On all 1310 models the bale roller speed can be independently adjusted relative to the wrap arm speed. T
his allows the film overlapping to be manually adjusted and therefore must be set by the operator. To do this,
first set the wrap arm speed as detailed in the previous section.
Load a bale and put a wrap of film on to it. With a marker put a line in the centre of the strip of film on the bale.
Adjust the roller speed so this line is just covered by the next strip of film applied. 53% is ideal overlapping.
Overlapping should be checked when bale size or bale quality changes.
The speed of the wrapping arm on the 1310 EH model is set by the valve (2) at the rear of the chassis adjancent to the
oil filter (1) (clockwise roation reduces the speed), the roller speed can be adjusted by turning the knob of the valve (3)
directly below the wrap arm speed adjustment valve (clockwise roation increases the speed) (see Feig 9.2).
For 1310 S & SM models the wrap arm and roller speeds are controlled by the valve (1) at the rear chassis, one knob (1A)
controls the speed of the rollers (clockwise rotation reduced the speed) the second knob (1B) controls the speed of the
wrap arm (clockwise rotation reduces the speed) (See Fig 9.3)