Tanaka TCS 40EA, Инструкции по безопасности и руководство пользователя

Страница: 15 / 52

English
15
GENERAL INSTRUCTIONS FOR FILING CUTTERS
File (54) cutter on one side of the chain from the inside out. File on
forward stroke only. ( Fig. 45 )
54
54 54
Fig. 45
5) Keep all cutters the same length. ( Fig. 46 )
Fig. 46
6) File enough to remove any damage to cutting edges (side plate
(55) and top plate (56)) of cutter. ( Fig. 47 )
55
56
Fig. 47
SHARPENING ANGLES FOR SHARPENING SAW CHAIN
1. Part Number 95VP
2. Pitch .325”
3. Depth Gauge Setting 0.025"
4. Side Plate Filing Angle 85°
5. Top Plate Angle 30°
6. File Guide Angle 10°
Maintenance schedule
Below you will fi nd some general maintenance instructions. For
further information please contact Tanaka dealer.
Daily maintenance
○
Clean the exterior of the unit.
○
Clean the chain oil fi lter port.
○
Clean the groove and oil fi lter port in the guide bar.
○
Clean the side case of saw dust.
○
Check that the saw chain is sharp.
○
Check that the bar nuts are su ffi ciently tightened.
○
Make sure that the chain transport guard is undamaged and that
it can be securely fi tted.
○
Check that nuts and screws are su ffi ciently tightened.
Especially inspect the bolt of mu ffl er and ensure that they are
properly tightened before starting engine. Should any of the
bolts be loose, retighten them immediately. Failure to do so
could result in serious hazard.
○
Check the tip of the bar. Please exchange it for the new one
when it is worn out.
○
Check the band of chain brake. Please exchange it for the new
one when it is worn out.
Weekly maintenance
○
Check the starter, especially cord and return spring.
○ Clean the exterior of the spark plug.
○
Remove the spark plug and check the electrode gap. Adjust it to
0.024” (0.6 mm) or change the spark plug.
○
Clean the cooling fi ns on the cylinder and check that the air
intake at the starter is not clogged.
○
Clean the air fi lter.
Monthly maintenance
○
Rinse the fuel tank with gasoline, and clean fuel fi lter.
○
Clean chain oil fi lter.
○
Clean the exterior of the carburetor and the space around it.
○
Clean the fan and the space around it.
○
Clean the mu ffl er of carbon.
NOTE
When ordering the parts to your nearest dealer, please use the
item numbers showing on the parts breakdown section in this
instruction.
BAR NO.
LENGTH-
TYPE
CHAIN NO.
MODEL NO.
OREGON
107498
105191
104968
105355
13”
15”
16”
18”
95VP-56
95VP-64
95VP-66
95VP-72
000Book̲TCS40EA̲US.indb 15 000Book̲TCS40EA̲US.indb 15 2010/09/01 16:48:24 2010/09/01 16:48:24