Tanaka TBC-290 series, Инструкция по эксплуатации

Страница: 10 / 72

GB-4
Specifications
MODEL TBC-290/S TBC-290D TBC-340 TBC-340D/340DS TBC-340PF TBC-340PFD/340PFDS
Engine
Displacement (cm
3
) (ml) 28 (1.71 cu.in) 32.2 (1.96 cu.in) 32.2 (1.96 cu.in)
spark plug
CHAMPION RCJ6Y
or equivalent
CHAMPION RCJ6Y or CJ6Y
or equivalent
CHAMPION RCJ6Y or CJ6Y
or equivalent
Idlling speed (min
-1
) 3,000 3,000 3,000
Recommended max. speed (min
-1
) 11,000 11,000 11,000
Speed of output shaft (min
-1
) 8,500 8,500 8,500
Max. engine output (kW) 1.05 1.17 1.15
Fuel tank capacity (cm
3
) (ml) 700 (23.6 fl. oz) 700 (23.6 fl. oz) 700 (23.6 fl. oz)
Dry weight (kg)
5.2/5.4
(11.5/11.9 lbs)
6.3
(13.9 lbs)
5.3
(11.7 lbs)
6.4/6.5
(14.1/14.3 lbs)
5.8
(12.8 lbs)
6.7/6.8
(14.8/15 lbs)
Cutting attachment Type / Dia. (mm)
Nylon
cord
Metal
blade
/3Tx255
Nylon
cord
Metal
blade
/4Tx230
Metal
blade
/3Tx255
Nylon
cord
Nylon
cord
Metal
blade
/3Tx255
Nylon
cord
Sound pressure level
LpA (dB (A))
(ISO 22868)
Equivalent 95.0 93.8 98.2 94.7 94.7 98.2 96.8 93.4 96.8
Uncertainty 3 3 3 3 3 3 3 3 3
Measured Sound
power level LwA (dB (A))
(ISO 22868 )
Equivalent 110 107 110 107 107 110 109 106 109
Guaranteed Sound
Power level LwA (dB (A))
(2000/14/EC)
Racing 116 116 116 116 116 116 116 116 116
Vibration level (m/s
2
) (ISO 22867)
Equivalent (Front handle/Left handle) 6.3 5.1 2.9 3.4 5.7 3.8 3.0 3.1 1.4
Equivalent (Rear handle/Right handle) 3.4 5.6 3.3 4.4 6.3 4.3 3.0 4.2 1.6
Uncertainty 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
Idling (Front handle/Left handle) 1.9 1.6 2.4 2.9 1.3 1.1 2.1 1.2 1.3
Idling (Rear handle/ Right handle) 1.7 1.3 1.7 3.8 1.5 1.3 1.5 0.8 0.8
Racing (Front handle/Left handle) 8.7 7.0 3.3 4.3 7.9 5.2 3.7 4.2 1.6
Racing (Rear handle/ Right handle) 4.4 7.8 4.4 4.6 8.8 5.9 4.0 5.9 2.1
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the
State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter
out microscopic particles.
NOTE : Equivalent noise level/vibration level are calculated as the time-weighted energy total for noise/vibration levels under various
working conditions with the following time distribution : 1/2 idle, 1/2 racing.
*All data subject to change without notice.