tams elektronik
FD-R Extended
English
Settings for the flash lights
(continuation)
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
On-time of the flashlights
AUX1
132 0 … 255
(4)
The maximum value of the on-
time is the value set in CV#106
et seq.
The higher the input value, the
longer is the on-time.
AUX2
133
...
...
AUX6
137
Example: For AUX1 is set in
CV#106 a value of 100 for the
flashing frequency and in
CV#132 a value of 60 for the
on-time.
With a value of 50 in CV-132 on- and off-time would have the same length, with a value of
100 the light would be switched on permanently.
Double flashing: Length of the break beween the two flashlights.
AUX1
140 0 … 255
(2)
Frequency and on-time have to
be set in CV#106 et sqq. and
CV#132 et sqq. The length of
the break is the longer the
higher the input value is.
For the input values for CV#106
et sqq., 132 et sqq. And 140 et
sqq. applies:
(CV#132) x 2 + (CV#140)
< (CV#106)
AUX2
141
...
...
AUX6
145
Page 41
