tams elektronik
FD-R Extended
English
6.2. Connection to the voltage supply
When connecting the vehicle´s current collectors check the right
assignment (left / right). When interchanging the connections, the
outputs switched depending on the direction of motion will be switched
incorrectly in regard to the direction of travel.
6.3. Connecting accessories to the outputs
Disconnect any existing diodes in the leads to the lamps, otherwise the
lamps might not light. Connect the lamps and the accessories to the
function outputs of the decoder (AUX1 to AUX6).
When you want to use the factory (default) settings of the decoder,
check the preceding list. Otherwise you can assign the outputs to the
function keys voluntarily by setting the configuration variables. Regard
the effects "Dimming" and "MARslight" cannot be set for the outputs
AUX5 and AUX6.
If the lamp or the accessory is already connected with one side to
vehicle ground, the connection is complete. If not, connect the second
side of the lamp or the accessory to the decoder´s return conductor for
all functions (point X12).
Fig. 1: Connection of the voltage supply and of accessories
Page 21
