tams elektronik
English
FD-R Extended
are switched off. Example of use: For some types of electric couplings
you need the full voltage for decoupling and the voltage then siwtched off
to protect the couplings.
Shunting light: You can program the outputs so that they are
switched on generally during shunting operation (to be switched with
F3 or F4). The dependence on the direction of travel will be nullified
for these outputs during shunting operation.
Special function for speed level 0: It is possible to program one
function to switch off other functions or switch on special function
outputs at speed level 0. Example of use: In some locomotive sheds
it is customary that the tail lamps of parked locomotives have to be
temporally set at the front and the back.
Effects of the function outputs AUX1 to AUX4
Dimming: Example of use: The electric bulbs of older vehicles made
for analogue operation can be dimmed and thus must not be
exchanged after the mounting of the decoder.
Dimming depending on the speed level: The voltage will be dimmed
depending on the speed level. This enables weak smoke generation during
halts or a switched off or dimmed cab lighting while the train is moving.
MARslight (= light intensity going up and down): Example of use:
american locomotives with this type of lighting.
Servo output
The decoder has a connection to be used as a (third) switching input or
as an output to control a servo optionally. The voltage supply for the
servo cannot be provided by the decoder. For that reason an external
voltage supply (e.g. servo PCB item-no. 70-05900) is required.
The servo is controlled by:
setting the end positions via CVs and controlling by pushing the
function keys ("on" = end position 1 , "off" = end position 2) or
input of a value for the folding square by POM, which allows to
approach to any folding square.
Page 12
