tams elektronik 43-02345, Руководство пользователя

Страница: 11 / 40

tams elektronik
WD-34 | WD-34.2 | WD-34.M English
Operation via vehicle decoder commands
(WD-34.2 and WD-34.M only)
You can use a vehicle decoder address (locomotive address) to operate
the turnout decoders WD-34.2 and WD-34.M instead of an accessory
decoder address (turnout address). The 4 outputs of the decoder are
switched via the function keys F1 to F4 then. This allows to use the
WD-34.2 and WD-34.M in combination with DCC control units not
designed for controlling turnout addresses.
Programming
Using a DCC central unit, the decoder address and the decoder´s
features can be defined by programming the configuration variables
(CV). It is also possible to set the address by using a programming
jumper (WD-34) or a push-button switch (WD-34.2 and WD-34.M).
When using a Motorola central unit the (accessory) decoder address
has to be set with a programming jumper (WD-34) or a push-button
switch (WD-34.2 and WD-34.M). Changing the other decoder´s
features or assigning a locomotive address is neither necessary nor
possible in layouts run in Motorola format only.
Feedback via RailCom
The turnout decoders are RailCom compatible, i.e. the decoders are
able to pass the RailCom messages via the rails to special RailCom
detectors. This allows e.g. to feedback the correct performance of
setting and switching commands or the actual setting of turnouts.
Page 11