TallyGenicom T6212 Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 92

TallyGenicom T6212 Скачать руководство пользователя страница 76

Operator Manual

3–40

Test Menu

In TEST Menu you will find diagnostic test print patterns used to check printer
functions and a parameter that allows you to control paper motion sensing.

Use the Up and Down Arrow keys to scroll to the desired selection. To move
down in the menu use the Up Arrow key.

Pattern Category

The Pattern Category has a series of printer self-tests which have predefined
patterns used to test the basic printer functionality. Selection of the patterns is
done by scrolling with the Up or Down Arrow keys to the requested option, and
pressing the Enter key. The test begins based on the current margins and font
information selected. All of the panel keys are disabled while the test is
running except for the View key and the Enter and Clear keys, which terminate
the test. Once the test is terminated, all of the keys are activated.

Print

Option

Prints

Upper

Rolling ASCII characters between 0x20 and 0x5E

All Characters

All characters from the available character sets

63/69

63 uppercase characters followed by 69 spaces.

ECMA

A pattern specified by the European Computer Manufac-
turers Association. Used for acoustic testing.

Columns

Number of columns on the line, based on margin dis-
tances

Fault Override Category

This category deals with the configuration of fault information from the Engine
Manager and the Control Processor. If the option is set to On, then the fault is
overridden and won't be reported on the panel. If the option is set to Off, then
the override is disabled and the fault is reported if it occurs.

Paper Motion

Controls paper motion fault reporting status. This setting is saved in NVRAM so
that it does not need to be set up on powerup each time.

Automatic Paper Motion Fault Retry is a feature that has been imple-
mented to eliminate intermittent false paper motion faults. When a paper
motion fault is detected while printing is in progress, the paper is re-
versed approximately 3 inches, then moved forward again. If the paper
motion fault persists, the printer is placed offline and the fault is re-
ported. This feature can eliminate false paper motion faults caused by
random electrical noise or paper chads/dust that can be removed by the
paper reversal.

«
...
74
75
76
77
78
...
»

Содержание T6212





























































































Отзывы:

Нет отзывов