TallyGenicom T6212, Руководство оператора, Страница: 59 / 92

3–23
Chapter 3: Printer Menus and Configuring Your Printer
Graphics Category
This category allows you to configure certain aspects of the Graphic Process-
ing Options on your printer.
Code V Cmd Char
This parameter allows you to change the CVCC. The Default for this parameter
is the ASCII caret ( ^ , Decimal 94, HEX 5E) character.
Smooth Size
This parameter controls the size at which block characters are “smoothed.”
The default is 3, which means that size 3 block characters will be smoothed,
but size 2 block characters will not. This parameter is used by Code V and
PGL.
PY Then
This parameter defines printer response to characters following the ^PY Com-
mand on the same line.
None: All data, plus the line terminator are ignored (default)
All: All data is executed
Term: All but the terminator is ignored
Free Format: Depends on the state for Free Format Mode
PN Then
This command defines printer response to characters following the ^PN Com-
mand on the same line.
None: All data plus the line terminator, are ignored (default)
All: All data is executed
Free Format: Depends on the state for Free Format Mode
For PY Then and PN Then: Even though Code V documentation states
that all other data on the line is ignored, some Code V installations do
not follow this rule.
Dark Bar
This parameter allows you to set the base dot density at which bar codes will
print. Default is Low .
All bar codes will print at the selected density unless the user program re-
quests a higher density. When the user program requests a higher density, the
printer will switch to the next higher density than the base density. The follow-
ing table shows the density selections and how they change when the printer
receives a program request for a higher density: