TallyGenicom T6200 Series, Руководство оператора

Страница: 62 / 92

Operator Manual
3–26
Automatic PY
If Automatic PY is Enabled, the printer is automatically in Code V graphics
mode, and a ^PY command is not needed in the file being sent to the printer to
begin Code V graphics. The default is Disabled.
MTPL Bar
Setting this parameter will print out barcodes for MTPL. Otherwise, the se-
quences will be printed as text only. The selections are ON and OFF, with the
default being OFF. This parameter only affects the MTPL emulation.
Secured
In secured mode (ON), normal text characters can be printed to the right or left
of barcodes. In unsecured mode (OFF), it is not possible to print more than
one line with normal characters in the bar code line. The default is ON. This
parameter only affects the MTPL emulation.
IGP Terminator
This selects the Terminator for IGP. When set to CR, all IGP commands are
required to be terminated with a carriage return. When set to CR/LF, all IGP
commands are required to be terminated with a carriage return and line feed.
BlkMaxH
BlkMaxV
BlkMinH
BlkMinV
These four parameters provide the ability to create block characters using
FreeType fonts. However, the user may find that very small FreeType charac-
ters are not legible, and very large FreeType characters may print too slowly.
These four allow the user to select the minimum and maximum horizontal and
vertical size of block characters that will be generated using the FreeType
characters.
Postnet Density
Determines whether POSTNET bar codes are printed in Low Density (72 DPI)
or High Density (144 DPI). Low Density is the default setting. POSTNET bar
codes printed in High Denisty wil print at half the speed of Low Density.
PGL Terminator
Determines whether or not a CR-LF terminator for PGL commands will cause a
line feed to occur.
CR: Will allow line feeds which follow the carriage return to be executed.
Example: ~EXECUTE;TEST<cr><lf>
<cr><lf>
~NORMAL<cr><lf>
The above example would execute three line feeds following the job EXAMPLE.
CR-LF: Will NOT execute line feeds following a carriage return. In the above
example, the LFs would not execute. This is the default.