TallyGenicom T6200 Series Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 92

background image

Operator Manual

3–18

Report

You can use this parameter to print or display a report.

Current Config

This selection produces a printed report of the current printer configuration.
The report contains a header which identifies the installed software and
interface, any options that are installed, and statistics for time powered on,
time printing, and total lines printed.

All Configs

Produces a printed report of all the saved printer configurations. The report
contains a header which identifies the installed software and interface, any
options that are installed, and statistics for time powered on, time printing, and
total lines printed.

Configs 1-10

Produces a printed report of any of the saved printer configurations. The
report contains a header which identifies the installed software and interface,
any options that are installed, and statistics for time powered on, time printing,
and total lines printed.

Calibrations

Produces a printed report of the printer calibration settings. The report con-
tains a header which identifies the installed software and interface, and statis-
tics for time powered on, time printing, and total lines printed. The body of the
report shows the values of the current sensor and print timing calibrations. It
also contains a report of the Ribbon Monitor status.

Ribbon Count:

Displays the last fault message on the control panel display.

Last Fault

Displays the last fault message on the control panel display.

Fault Log

Display the fault log.

Version

Displays the version numbers of the installed software on the control panel
display.

Intellifilter

Prints the currently downloaded Intellifilter.

Beeper Mode

When a fault event occurs, the beeper will sound. There are two options:
Single or Persistent. In the Single mode, each fault event will cause the fault
alert beeper to produce just one short-duration audio tone. In the Persistent
mode, a fault event will cause periodic shor-duration audio tones that cycle
about once per second and will persist until the operator clears the fault.

«
...
52
53
54
55
56
...
»

Содержание T6200 Series





























































































Отзывы:

Нет отзывов

Похожие инструкции для T6200 Series

IMAGERUNNER ADVANCE C5051

Бренд: Canon Страницы: 72

iPF710 - imagePROGRAF Color Inkjet Printer

Бренд: Canon Страницы: 92

iPF8000S - imagePROGRAF Color Inkjet Printer

Бренд: Canon Страницы: 8

imageRUNNER ADVANCE C9075S PRO

Бренд: Canon Страницы: 48

Two-Knife Booklet Trimmer-A1

Бренд: Canon Страницы: 32

Perfect Binder-C1

Бренд: Oce Страницы: 82

IMAGERUNNER 7095 PRINTER

Бренд: Canon Страницы: 615

imageRUNNER C3125i

Бренд: Canon Страницы: 816

Бренд: 3D Systems Страницы: 26

Бренд: 3D Systems Страницы: 39

WorkSeries 200 Series

Бренд: 3D Platform Страницы: 9

Бренд: F+D Feinwerk- und Drucktechnik Страницы: 41

Бренд: QMS Страницы: 27

Бренд: QMS Страницы: 3

Бренд: TASKalfa Страницы: 36

Бренд: Kodak Страницы: 2

Бренд: SEH Страницы: 5

Бренд: Edimax Страницы: 93

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды