2–5
Chapter 2: Printer Control Panel
TOF Key (Top of Form)
When you load paper, you line the top of your form (usually the perforation)
with the indicated position on the tractor (see Figure 2-3). Once the paper is
loaded, pressing this key moves the paper so that printing commences at the
proper position on the form.
10 CPI
1 0
2 0
3 0
5 CPI
5
1 0
1 5
Align Desired Top-Of-Form
Location At This Point
Figure 2-3 . Aligning Form on Tractors
View Key
Holding down this key moves the paper up so that you can see the last line
that was printed. If you press it while a job is printing, it will suspend the print
job until you release the key.
Up and Down Arrow Keys
Online, these keys make fine adjustments to the Top of Form position.
Offline, these keys position the paper in preparation for setting the Top of
Form position. (In this mode, these keys will auto-repeat if you hold them
down). They are also for scrolling through Menu items (see Menu/Back key,
next).
After making adjustments, it's not necessary to reset the Top of Form
(unless a different top margin is required for a new form).
In Operator, Config, or Test modes, the Up and Down Arrow keys scan lists
of categories, parameters, and selections.
Содержание T6200 Series
