Tally T8106, Руководство пользователя

Страница: 92 / 212

Tally T8106/T8406 Color Laser Printers User Guide
84
Customizing Overlays
The Overlay tab allows you to select and configure an overlay for your
document.
After you choose your settings, click
OK .
Item Description
File
Specifies which file to print. File saves a list of
the ten previous files selected.
Page
Selects which pages the overlay will be printed
on.
Select Bitmap…
Displays a dialog box allowing you to browse to
the desired bitmap file.
Color
Selects whether the overlay will be printed in
black or white. When the selected bitmap is not
a two-color, black and white bitmap, this field is
disabled.
Darkness
Controls how dark the overlay is. A low value
makes the overlay less visible. A high value
makes the overlay dark.
Size
Automatically/
User defined
Specifies the size of the bitmap. When Auto-
matically is selected, the bitmap prints at a size
of 30%.
Percent
Specifies the size of the selected bitmap. The
selected value specifies the ratio of the larger
edge of the bitmap to the larger edge of the
paper.
Position
Automatically/
User defined
Specifies where the overlay will be printed on the
page. If you select Automatically , the overlay
will be automatically centered on the page. If
you select User defined , you must also set the X
and Y coordinates of the overlay.
Position
X
Specifies the horizontal position of the water-
mark on the page. The position is measured in
percentage points from the left edge to the right
edge of the page. If you select 0 , the overlay will
begin at the left margin. If you select 100 , the
overlay will begin at the right margin.