Tally T8106, Руководство пользователя

Страница: 128 / 212

Tally T8106/T8406 Color Laser Printers User Guide
120
Troubleshooting Jam A
If jams occur often in the Jam A area, proceed to the following problem-
and-correction procedures.
Caution! Do not disassemble the printer for further troubleshooting and/
or repair. If the problem is not found and corrected after following these
troubleshooting steps, contact a Tally Service Technician.
.
8. If the T8406 printer model has a
feeder tray and it is out of the
printer, pull the paper-feed guide
rails outward, and align the tip of
the tray with the guide rails.
Insert the paper tray squarely and
evenly back into the paper feeder.
For T8106 printers with a paper
feeder, use the same steps as
main paper tray.
Note: Make sure that the four corners of the paper are aligned squarely and
sit firmly in the paper tray.
9. Close the back cover carefully until it locks.
Jam A Possible Cause Correction
Paper from the paper tray
jams between the paper
tray and the transfer drum.
Too many sheets of paper are
in the paper tray.
Put the proper number of
sheets of paper in the tray.
The paper guides do not guide
the paper properly.
Adjust the paper guides to the
paper size.
Paper from a previous paper
jam is caught inside of the
printer.
Remove or release the paper.
The paper is damp from infre-
quent use of the printer.
Reload paper trays with fresh
paper from new packages.
The paper or material is the
wrong thickness for proper
printer operation.
Reload trays with paper or
material of the proper thick-
ness.