Talitor Jupiter 30450711S, Руководство пользователя

Страница: 42 / 111

Standalone DVR – Jupiter Series
42
5.3 Setting
In main menu, highlight “SETTING” icon and double click on the mouse. System setting
interface is shown as below. See Figure 5-2.
Figure 5-2
5.3.1 General
General setting includes the following items. See Figure 5-3.

System time: here is for you to set system time.

Date format: there are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.

Date separator: there are three denotations to separate date: dot, beeline and solidus.

Snapshot: Here you can set image upload interval. (For special series only)

DST: Here you can set DST time and date. Please enable DST function and then click
“Set” button. You can see an interface is shown as in Figure 5-4. Here you can set start
time and end time by setting corresponding week setup. In Figure 5-4, enable date
button, you can see an interface is shown as in Figure 5-5. Here you can set start time
and end time by setting corresponding date setup.

Time format: there are two types: 24-hour mode or 12-hour mode.

Language: English (* Require other languish, please contact your supplier).

HDD full: When the hard dish is full, there are two options: stop recording or rewrite.

Pack duration: Here is for you to specify record duration. Default value is 60 minutes.

DVR No: If you control several DVRs with only one remote controller, you can
give a name to each DVR for your management.

Video standard: There are two formats: NTSC and PAL.

Auto logout: Here is for you to set auto logout interval once login user remains inactive
for a specified time. Value ranges from 0 to 60 minutes.
Note:
Since system time is very important, do not modify time casually unless there is a must!
After completing all the setups please click save button, system goes to the previous
menu.