Talitor Jupiter 30450711S, Руководство пользователя

Страница: 27 / 111

Standalone DVR – Jupiter Series
27
Playback or search in the redundant disk.
There are two ways for you to playback or search in the redundant disk.

Set redundant disk(s) as read-only disk or read-write disk. See Figure 4-13.
(“MAIN MENU” -> “ADVANCED” -> “HDD MANAGEMENT”). System needs to reboot to
get setup activated. Now you can search or playback file in redundant disk.

Dismantle the disk and play it in another PC.
4.5 Detect
4.5.1 Go to Detect Menu
In the main menu, from Setting to Detect, you can see motion detect interface.
See Figure 4-14. There are three detect types: motion detect, video loss, camera masking.
4.5.2 Motion Detect
Detect menu is shown as below. See Figure 4-14.

Channel: select the channel you want to implement motion detection.

Event type: from the dropdown list you can select motion detect type.

Record Channel: select the channel to activate recording function once alarm occurred.
Please make sure you have set MD record in schedule interface. (“MAIN MENU” ->
“SETTING” -> “SCHEDULE”) and schedule record in manual record interface.
(“MAIN MENU” -> “ADVANCED” -> “MANUAL RECORD”)

Latch: when motion detection complete, system auto delays detecting for a specified
time. The value ranges from 10-300 (Unit: second).

Region: Click “Select” button, the interface is shown as in Figure 4-15. Here you can set
motion detection zone. There are 396(PAL)/330(NTSC) small zones.

Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity.

Show message: System can pop up a message to alarm you in the local host screen if
this function is enabled.

Send email: System can send out email to alert you when alarm occurs.

PTZ activation: Here you can set PTZ movement when alarm occurs. Such as go to
preset, tour & pattern when there is an alarm. Click ”select” button, you
can see an interface is shown as in Figure 4-16.

Period: Click “Set” button, you can see an interface is shown as in Figure 4-17. Here you
can set for business day and non-business day. In Figure 4-17, click “Set button,
you can see an interface is shown as in Figure 4-18. Here you can set your own
setup for business day and non-business day.

Anti-dither: Here you can set anti-dither time.

Sensitivity: there are six levels. The sixth level has the highest sensitivity.

Alarm output: when alarm occurred, system enables peripheral alarm devices.

Tour: Here you can enable tour function when alarm occurs. It is a single window tour.
Please go to chapter 5.3.9 Display for tour interval setup.

Snapshot: System can snapshoot when alarm occurs.