Standalone DVR – Jupiter Series
16
Chapter 3 System operation
Note:
* Please make sure at least one HDD is properly installed before turning on the DVR .
* For proper installation, refer to Chapter 2 – 2.1 HDD & CD/DVD Burner installation.
3.1 Turn on/off the recorder
3.1.1 Turn on the recorder
Plug in the power cable, switch on the power button at the back of the recorder, power indicator
light on; DVR on. If the starting time is within the programmed recording time, the system will
start recording function automatically. Corresponding channel indicator light on and system work
in a normal manner.
Note: if the system stops during HDD boot detection, the HDD many not be installed right and
please check the HDD connections (HDD cable connections, power connections).
3.1.2 Enter the setting menu
Press “Enter” of the login screen before you enter the menu. You must select the login user name
and input the password. There are two level of authority –
ADMIN
and
USER
:
ADMIN
-> Username: 888888. Password: 888888
USER
-> Username: 666666. Password: 666666
With USER authority, you are not allowed to enter system setting and admin setting.
Note: For the consideration of security, please change admin’s password.
3.1.3 Turn off the recorder
Press the POWER key on the front panel for 3 seconds to stop the current operations. Then
switch off the power button at the back panel of the DVR to turn off the power.
3.1.4 Power off recovery
When the power is cut off abnormally, the recorder will recall its last state and continue where it
left off. The state indicator light is the same as it was before the power off.
3.1.5 Change the battery of the DVR
Change the battery of the DVR, recommend to the same type of Lithium fastener batteries .
Note: Please check the system time in time and generally change the battery each year to ensure
the veracity time.
3.2 Recording operation
The default recording mode after the starting of DVR is 24 hours continuous recording. User can
choose suitable recording mode according to the necessity. Instructions for the difference
recording modes as follows:
3.2.1 Schedule recording
The users can set up to 6 timing period for schedule recording. See details at
“MAIN MENU”
->
“SETTING”
->
“SCHEDULE”
.
3.2.2 Manual recording
Press “REC” button on the remote controller or “●” on the front panel.
Check the status of each channel in the recording menu; “●” means the channel is in
recording, while “○ ” means the channel is not in recording.
Select the channel to be recorded, please press the related number key (or use
“
”
key/jog shuttle choosing) make the channel “●” on the screen then press
“Enter“
to start
recording.
Repeat above steps and make the channel “
○
” to stop the camera from recording.
Press
“ESC”
to return.
Содержание Jupiter 30450711S
Страница 15: ...Standalone DVR Jupiter Series 15 2 6 Application Diagram...
Страница 29: ...Standalone DVR Jupiter Series 29 Figure 4 16 Figure 4 17 Figure 4 18...
Страница 33: ...Standalone DVR Jupiter Series 33 Figure 4 21 Figure 4 22 Figure 4 23 Figure 4 24...
Страница 87: ...Standalone DVR Jupiter Series 87 Figure 6 39 Figure 6 40 Figure 6 41 Figure 6 42...
