TALEX Sp. z o.o.
ul. Dworcowa 9C
77-141 Borzytuchom
tel.: +48 59 821 13 40
e-mail:
35
9.
DECLARATION OF CONFORMITY
1. The product manufacturer:
Talex Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa9c
77-141 Borzytuchom
www.talex-sj.pl
2. Name of the product:
Swather tedder Bocian 170/225
Year Built: ………………… Serial no.: ……………………
3. The product class:
PKWiU 29.32.32-30.30
Swather tedders, not mentioned elsewhere
4. The purpose and the range of use of the product:
Swather tedder
Used to throw down mowed lowland plants
And for tedding dried and dried hay and straw.
1.
Documents:
EU provisions
Polish provisions
Directive Nr
Title
Document title
Nr
2006/42/WE
Machine Directive
Regulation of the Minister of Economy of 21
October 2006 on the basic requirements for
machines
Acts. Law
199/1228
Nr normy
Title
PN-EN ISO 12100-1:2005
Machines. Safety. Basic terminology, general rules of design. Part 1: Basic terminology, methodology
PN-EN ISO 12100:2011
Machine Safety – General rules of designing – risk assessment and risk reduction
PN-EN 14121-1:2008
Machine safety – risk assessment – Part 1: Rules
PN-ISO 730-1:1996
Wheeled tractors – rear Three point suspension system -- Class 1, 2, 3 i 4
PN-EN ISO 4254-1:2009
Agricultural machines -- Safety – Part 1: General requirements
PN-ISO 11684:1998
Tractors, agricultural and forest machines, moto tools. Safety signs and hazard pictograms. General
provisions.
PN-ISO 3600:1998
Tractors, agricultural and forest machines, moto tools – Instructions Manual – Content and form
PN-M-73022:1973
Hydraulic driver and steering – hydraulic steering components – classification and designation
Quality Control Instructions
Quality Control Instructions 2012/03 Version 01
Painting Instructions
Painting Instructions, wet paint layering 2012/02 Versio9n 01
Welding Instructions
Welding Instructions MIG/MAG 2012/01 Version 01
The conformity with the requirements of the directives and norms are based on the research conducted by the company: “FITMECH”
Foundation of the Polish Engineers and Mechanical Technicians in Slupsk
The research was performer by: Zbigniew Myszka, Master of Science – Assessor SIMP NR 9763/11
I declare with full responsibility, that the product is in compliance with the reference documents listed in section 5.
Borzytuchom 02.01.2013
Karol Jaworski ....................................................................
(place and date of issue)
(first and last name and the signature of the authorized by the manufacturer
person
)
