TALEX Sp. z o.o.
ul. Dworcowa 9C
77-141 Borzytuchom
tel.: +48 59 821 13 40
e-mail:
6
• Before starting work with the swath conditioner, familiarize yourself with the
operation by reading the operator's manual, safety rules as well as operating
and adjustment recommendations.
• The weight of the machine attached to the vehicle may affect the handling.
In this situation, be especially careful.
• The operating manual should be available with the machine. When lending
the machine, hand over it in a technically efficient manner, together with the
instructions for use.
• It is forbidden to attach additional means of transport to the swath
conditioner.
• During the first start-up, check the operation of the machine and make initial
adjustments without load.
• Mounting secures of the three-point linkage of the swath conditioners pins
should be performed only with the use of typical security pins in the form of
cotter pins. Working with other security measures is prohibited.
• Due to natural wear, the condition and completeness of the raking springs
should be checked according to the recommendations described in section 6.
Service and maintenance.
• When collecting and transporting the machine, check its technical condition
for damage.
• It is forbidden to stand under the lifted machine, risking to be crushed by
structural elements.
• During adjustment, do not put fingers or limbs between structural elements
of the machine.
• The operator of the vehicle who works with the swath condirioner must be
careful during the work and adjustments, nobody should approach the machine
and should not be closer than 50m from the working machine.
• When turning around or backing up, or manoeuvring with the machine, make
sure you have adequate visibility and a suitably trained person.
• It is forbidden to stay between the vehicle and the machine with the vehicle
engine running.
• Working on slopes of more than 15% is not allowed.
• Be especially careful when working on slopes.
• When making turns, the PTO drive (PTO shaft) must be disengaged.