Vertical adjustment
Horizontal adjustment
■
Wall mount
HORIZONTAL
ADJUSTMENT
VERTICAL
ADJUSTMENT
(1) Loosen cover locking
screw to detach cover.
(4)After adjustment is completed, lightly push head unit.
It will replace to the armed position automatically.
When head unit is placed at
testing position, alarm LED lights
and alarm output continuously
outputs
(Trouble alarm).
(3) Adjust the coverage by moving the mirror so that LED on
the head unit is visible through mirror from location to be
protected.
Adjust the coverage
so that center of
sensitive zone
should be positioned
at human waist
height.
(2) Slide the head unit to bring the sensor unit into aiming
position.
Slip to the arrow direction and it will be automatically
locked at testing position.
(Ex.) In case of 13' (4m) wall mount height and 55'
(16.8m) range, selector should be set at 5.
Coverage can be adjusted by turning area selector in accordance with area set chart on the back
of sensor unit.
Loosen base unit locking screw and rotate sensor unit horizontally for adjustment.
ADJUST UNDER AIMING POSITION
DISTANCE
ft. m
WALL
6.5
8.5
10
13
2.0
2.6
3.0
4.0
4
6
8
11
25
7.6
33
10.0
40
12.0
45
13.7
55
16.8
60
18.3
66
20.0
75
22.8
82
25.0
3
5
6
9
3
4
5
7
2
4
5
6
2
3
4
5
2
3
4
5
1
2
3
4
1
2
3
4
1
2
3
4
＊
Insert screwdriver in the
base locking hole and loosen
the locking screw.
Adjust by rotating sensor
unit. After adjustment,
tighten the locking screw.
＊
Hold the parabolic mirror
with hard and rotate it for
adjustment.
Do not touch the mirror
face.
＊
Hold the parabolic mirror
with both hands push
△△△
portion for horizontal fine
tuning.
(When wall mounted, this
is horizontal adjustment.)
＊
＊
LIGHTS RED
INVISIBLE
INVISIBLE
VISIBLE
Indicator
4
6
5
13' (4m)
10' (3m)
6.5' (2m)
16'
(4.9m)
33'
(10m)
55'
(16.8m)
0
5
Protrusion
Protrusion
When operation check shows improper area setting, visually
check its area setting.
■
ADJUSTMENT OF THE FIELD VIEW
