8
Precautions for Use
•
Avoid touching the hot water pipe
The hot water pipe is hot to touch. Avoid touching the pipe directly.
•
Avoid dropping and placing heavy or sharp objects on the basin
This may cause damage, such as scratches and cracks.
•
Do not use the product to wash sharp objects, such as scissors
This may scratch or damage the basin or neck cushion.
•
Avoid spillage of water from the outlet of the shower hose when filling the basin with water
When filling the basin with water, be sure to fill to the designated maximum level. [Page 18]
•
Set the temperature for supply of hot water to the device at 80°C or lower
Failure to do so may result in a malfunction or damage to the tap, check valve, flexible connector, and thermostatic
control knob.
•
Drain the water in cold regions
If you are using the product in cold regions during the winter season, be sure to drain the water by opening the strainer
of the check valve to prevent freezing. Failure to do so may cause water leakage accidents.
•
Be sure to use the neck cushion
The neck cushion must be used because providing treatment without using the neck cushion may place an unnecessary
burden on the neck and lead to injury.
•
Avoid the use of mint oil and aroma oils
Do not use mint oils and aroma oils. This may damage the shower head, shower head holder, shower hose, tap,
thermostatic control knob, neck cushion, drain cap, and other resin parts.
•
Avoid accidental contact of objects with the product
Avoid accidental contact of hard objects with the product.
This may cause the product to become deformed or damaged.
•
Avoid accidental contact of objects with the resin handle
Avoid accidental contact of hard objects with the resin tap and thermostatic control knob.
The plated surface may become scratched and cracked, causing the resin to peel off and result in injury.
•
Close the tap tightly
Make sure to stop the water by turning the tap clockwise completely after use and after completion of the work. Water
leakage accidents may occur if the water is not stopped completely.
•
Do not block the drain outlet when the product is not in use
Do not block the drain outlet with a drain cap, towel, or hairdressing gown after completion of the work.
The accidental release of water or the output of cold or hot water due to the nighttime increase in water pressure may
cause the water to spill out of the basin and lead to water leakage accidents. When the product is not in use, be sure to
remove the drain cap from the drain outlet and place it outside the basin.
•
Clean the hair catcher frequently
The hair catchers should be cleaned as frequently as possible. Cleaning should be performed after washing each
customer where possible because the use of the device without cleaning may cause the drain to become clogged with
accumulated hair and result in water overflow and unhygienic conditions.
•
Do not leave the shower head inside the water in the basin
The water in the basin may regurgitate if the pressure inside the water pipe decreases because of the cutoff of the
water supply for work.
