35
Daily Inspection
The following inspection should be performed for safe use of the product.
Daily inspections must be performed according to the details shown below.
Use without performing daily inspections may lead to injury and damage to the
product, accessories, and facilities.
WARNING
This may lead to operation defect or damage to the
device or accidental falls. Discontinue use and contact
your local Takara Belmont dealer.
If water is leaking from the connecting section between
the shower head plate and the main unit of the shower
head or between the main unit of the shower head and
the shower hose, the gaskets inside may be worn out.
Contact your local Takara Belmont dealer because this
may lead to water leakage accidents.
If hot or cold water is not output correctly or is cloudy,
the strainer of the catch valve may be stained. Clean
the strainer because this may cause defect in water
output.
[See pages 32 and 33]
If a few streams of shower water are coming outside,
the shower head plate may be clogged with scales and
rubbish. Remove and clean the shower head plate.
[See page 29]
If the temperature is not adjusted correctly or if there is
any foreign sound, there may be abnormalities in the
thermo parts. Discontinue use immediately and contact
your local Takara Belmont dealer because boiling water
may be output and cause burns.
Scratches, cracks, or peeling on the plated surface may
cause hand injury. Contact your local Takara Belmont
dealer to have these replaced.
If a foreign sound is heard or if hot or cold water does
not stop when the tap is fully closed, a tap defect may
be present. Close the taps on the cold and hot water
pipes immediately [see page 32], discontinue use, and
contact your local Takara Belmont dealer because this
may result in water leakage accident.
Is the basin or arm
loose?
Is hot or cold water
outputted correctly
from the shower
head?
Is the thermostatic
control knob
operating correctly?
Is the plating on the
tap or the thermo-
static control knob
peeled off?
Is the tap operating
correctly?
Hold the edge of the basin with
two hands and push or shake
gently in all directions to check
that it is not loose.
Release hot or cold water to
visually check that the water is
outputted correctly from the
shower head, if there is any
leakage from the connecting
section between the shower head
plate and the main unit of the
shower head or between the main
unit of the shower head and the
shower hose, and if there is any
clouding in the hot or cold water.
Turn the thermostatic control
knob and check that temperature
is adjusted correctly and if there is
any foreign sound.
*The sound of water flowing may
be heard as a foreign sound due to
the release of water.
[See page 15]
Visually check the appearance of
the tap and the thermostatic
control knob for any scratches,
cracks, and peeling on the plated
surface.
Check for any catches or foreign
sensation during operation and
maintenance.
Turn the tap and check that hot
and cold water is output correctly
and if there is any foreign sound.
Also, close the tap to check that
the hot and cold water stops fully.
*The sound of water flowing may
be heard as a foreign sound due to
the release of water.
[See page 15]
Inspection item
Inspection method
Inspection result and action to take in case of failure
Daily inspection items
