13
Fitting inside the basin
Attaching the Neck Cushion
Fastening pins are removable.
Make sure that the pins are not misplaced.
Align the neck cushion as shown in the figure and fit the neck cushion to the mount-
ing fixture
Attach the snap button on the left side
of the neck cushion to the fastening pin
on the mounting fixture
Shape the neck cushion along the mounting fixture and attach the snap button on
the right side to the fastening pin on the mounting fixture
Snap
button
Neck cushion
Mounting fixture
Fastening pin
1
2
3
Make sure that the neck cushion faces the correct direction.
Be sure that the entire neck cushion fits inside the basin.
Check that the snap buttons on the front and
back are attached.
Check that the snap buttons on the front and back are attached.
Snap
button
CAUTION
• When removing the neck cushion, remove the snap buttons (four locations) from
the fastening pins and lift the neck cushion. Removing the snap buttons forcibly
with excessive power may cause the parts to break.
• Check that the entire neck cushion is contained inside the basin and check that the
neck cushion is not folded or attached in an unnatural position. This may cause the
neck cushion to break or cause the water to spill out from the front of the basin.
• Do not apply excessive force when attaching the neck cushion. This may cause
damage to the neck cushion.
