![background image](http://html1.mh-extra.com/html/takara-belmont/sonix-ae-fbs-series/sonix-ae-fbs-series_operating-manual_3312020009.webp)
[ACTIVATOR]
7
After treatment has been completed, turn off the power switch.
5
Wipe down gently with the Facial Sponge after each use.
6
CAUTION
Do not leave the Activator switched on.
Handpiece becomes hot, resulting in malfunction of the product.
<
Auto-power Off function
>
Auto-power Off function is programmed in the product to avoid leaving the product powered on.
After 10 minutes after switching on, power is turned off automatically.
To use the product continuously, press the switch of the handpiece again.
Start treatment. (Refer to ‘Treatment Procedures” (Page 8))
4
CAUTION
Be sure to check the temperature of the vibration head and confirm that the
temperature is not too high, before applying it to client’s skin.
Hold the handpiece.
3
※
Holding the handpiece as shown in the illustration makes
operation easier, as the Rotatable Cord is installed in the handpiece.
Rotatable
Cord
Rotatable
angle
180°
The rotating angle of the Rotatable Cord is
180 degrees. Do not rotate it over 180 degrees.
Neglecting of this caution may cause breakage of
the handpiece.
CAUTION
CAUTION
※
Place the handpiece on the protection sheet placed
on the Sonix Box.