[ACTIVATOR]
6
Do not use the Activator to the following clients and skin parts.
Operating Instructions of Activator
CAUTION
When posing the operation;
Press the frequency switch which is under operation. (Either 1M or 5M)
If you are using in 1M, press 1M button, then it poses. When re-starting operation, press the frequency
switch again (1M or 5M).
・
On or areas around the eyes
・
Wound part
・
After shaving
・
Inflammation (inflamed acne or red swollen areas)
・
After physical or chemical peeling
＜
Treatment
＞
Select 1MHz or 5MHz and press either switch.
１
CAUTION
・
Do not carry out treatment on dry skin.
・
Always use in combination with cosmetics specially intended for use with
ultrasonic waves.
・
Keep the handpiece moving; do not pause movement, and do not press too firmly.
It may cause skin trouble.
・
Do not keep the Activator switched on.
The handpiece can become hot and cause a malfunction.
1M
5M
本体カバー
Frequency Switches
※
LED on the top part of the selected
frequency illuminates.
※
When changing the frequency while in an operation, press the required frequency switch.
Changing the output power.
２
※
LED color changes subject to the output power
HIGH : Red LED
LOW : Green LED
The Activator has two outlet power; HIGH or LOW.
Keep pressing the frequency switch for a couple
of seconds (1-2 seconds) to change the output power
to HIGH/LOW and back to LOW/HIGH.
＜
Which power to use
＞
Generally, the suitable power is HIGH when giving
the treatment. However, if the clients’ skin is sensitive
or very thin, set the output level to LOW.
＜
How to change the output power
＞
