＜
How to Change the Output Power
＞
The Exfoliater has two outlet power levels; HIGH (LED Lamp is red)
or LOW (LED Lamp is green). Press the switch on the handpiece and
keep it pressed for a couple of seconds (1 to 2 seconds). The output
power is switched to LOW and the LED Lamp color will change from
red to green. To change back to HIGH, press the switch on the Exfoliater
for a couple of seconds again, or turn the Exfoliater off then on again.
＜
Changing the Power
＞
Generally, the suitable power is HIGH when giving a treatment.
However, if the client finds the noise uncomfortable, or their skin is sensitive, set the output
level to LOW.
When water is spilled on the base part of the spatula (where covered by cap), rarely, howling sounds may be heard.
Please pay attention to the followings.
If the base part of the spatula is put in water, the water pooled in the base part may cause howling sounds.
NOTICE
＜
Auto-power off function
＞
Auto-power off function is programmed in the product to avoid the Exfoliater remained powered on.
After 20 minutes after switching on, power is turned off automatically.
To use the product continuously, press the switch of the handpiece again.
Red
Handpiece Switch (Keep pressing for 1 to 2 seconds)
Green
Base of the
spatula
Cap
10
[EXFOLIATER]
・
Short press of the switch
Turn on/off the handpiece.
(
The initial setting of the output power is HIGH.)
・
Keep pressing the switch long (1 to 2 seconds).
Changing the output power: HIGH
⇔
LOW
after each operation.
