Switch
※
This uses ultrasonic waves to remove aged collagen from the skin’s surface and debris from pores to reveal
refreshed and softer looking skin.
＜
Treatment
＞
Hold the handpiece and turn on the Power
Switch of the back side of SONIX Box.(Refer to Page 5)
Press the Switch on the handpiece and start treatment.
※
The LED Lamp lights up in red.
Using cotton wool soaked with cleansing lotion
(water solution) or purified water to apply moisture to
the face, slide the Spatula over the face.
※
Hold the handpiece so that the angle of the spatula to the skin
becomes 50°- 60°.
Hold the Grip part as shown in the
illustration.
After treatment has been completed, switch off the handpiece. When the Exfoliater movement
has stopped, replace it on the Sonix Box.
※
Check that the LED Lamp has gone out and that the movement has stopped.
Wipe face gently with the Facial Sponge moistened with water or hot water.
※
Wash and sterilize the spatula after each use. (Refer to the “Care and Maintenance” (Page 13))
Tip of the spatula:
at angle of
50°- 60°to the skin
CAUTION
Do not carry out treatment on dry skin.
Keep the handpiece moving; do not pause movement, and do not press too firmly.
It may cause skin trouble.
Do not leave the Exfoliater switched on. The spatula or handpiece can become
hot and cause a malfunction.
Never use a damaged spatula. If the tip of the spatula is damaged, it could
scratch the skin. Contact the nearest dealer or Takara Belmont directly.
Operating Instructions
[
EXFOLIATER]
9
１
２
３
４
５
Recommended cosmetics
LED lamp
