Takachiho Sangyo VerifierG2 MPL-H10S, Руководство по эксплуатации

Страница: 22 / 37

- 20 -
Indirect mode
Adjust output power
*Standard of adjustment.
- When depth is less than 0.6m / 2ft.
Þ
50% ~ 60%
- When depth is more than 0.6m / 2ft., less than 1.5m / 5ft..
Þ
70 % ~ 80%
- When depth is more than 1.5m / 5ft..
Þ
90 % ~ 100%
Note :Use Receiver more than 10m / 30ft. away from Transmitter
when starting the location work or an "Air Coupling"
between the Transmitter and Receiver can exist.
More than 10 m / 30ft. away
Indicate output power with the bar -
graph and the numerical value when
pressing / key.
Reduce power
Increase power
Note: If output is adjusted to 100%, you can usually locate in any place.
But the battery of the transmitter is redused as output increases.
Note: Detection of the Multiple Telephone Cable Pipes
(Metal Ducts) in Indirect mode
Don't assume that the peak point of the signal
strength obtained is the center of the multiple lines.
It is the central point of the electromagnetic field
applied by the Transmitter.
Receiving
sensitivity