Takachiho Sangyo VerifierG2 MPL-H10S, Руководство по эксплуатации

Страница: 24 / 37

- 22 -
8-2. Peak Mode
Starting Peak Mode
Press Peak / Null key .
To find the direction of the object line,
rotate the receiver over the object line and stop at the
position of the maximum peak value.
When “PUSH GAIN” appears, press Gain Adjust key until maximum peak value (not 100%)
is displayed.
To find the position of the object line,
70%
Peak = Direction of
the object line
30%
20%
70%
50%
50%
100% 100%
30%
30% When 100% appears…
When PUSH GAIN
appears…
70% appears as an initial receiving level.
Press Gain Adjust key.
Note: 100% is not the maximum peak value.
Maximum (peak) value, the precise position and direction, are obtained
when the Receiver blade is the top of the object line
Peak Mode
Is displayed
Receiving level
70
%
30
%
30
%
Same as Depth distance
approximately
Number of receiving
level is not indicated.
Same as Depth distance
approximately
Object Line
- - - - - -
Number of receiving
level is not indicated.
0
%
0
%