4.4 Change the System Password.
You should change the password for protect your WANpro to prevent unauthorized user.
The passwords are separate to two-part “Console” and “Telnet”.
To change the System Password, enter to the
Configuration
menu and selected
Security
, and
there are two submenus under
Security
selected
System security
.
Configuration TAINET WANpro 2000i Version 3.00
================================================================================
System Interface Routing Table [Security]
Security Configuration
System Security
Console Password [root ]
Telnet [enable ]
Front Panel [enable ]
Press: ASCII, SPACE, BS, DEL
TAB,ENTER:next field '<':left '>':right ESC:abort
Step 1.
Enter your new Console password (up to 10 characters), and press [ENTER]
The cursor will now move down to “Telnet” selection.
Step 2.
At Telnet selection press [SPACE BAR] to enable or disable this field, to change the
Telnet username and password please select enable, if you don’t want to active the Telnet
connection then select disable.
Step 3.
Enable or disable the front panel control, select disable to lock the front panel and will
not able to configure by the front panel.
Step 4.
After you have change the password properly the confirm menu will pop-up, select
“YES” for confirmation. If you have change any parameter in this menu, the TCS will require
you to restart the WANpro to make the new setting effective.
19
