Taiden HCS-4800 Series, Инструкция по установке и эксплуатации

Страница: 54 / 233

System Test
TAIDEN conference system provides the facility for system testing to find out the problems of units accurately. This
facility aims to find out and solve the problems prior to a conference to ensure the reliability of the entire conference
system.
The System Test consists of Key Test, Microphone Test, SI Channel Test and LED Test.

Key Test
The procedure of key test:
1. Click the “Start Test” button to begin;
2. All contribution units enter the key test state. To perform the key test, the operator shall press the keys on each
contribution unit following the indicator prompt;
3. When all keys are pressed, click the “Stop Test” button to stop;
4. The result of the test is shown in the left textbox.
Figure: Key Test interface

Mic. Test
Test the microphone of the units connected to the conference main unit, and the interface of the following figure is
displayed:
To begin the test, the user shall first set the test time for each microphone in “Mic. Test Time (00:00:00, HH:MM:SS)”,
select “Play Sound” or not (play white noise to assist testing), then click the “Start Test” button to begin. If the current
microphone is in good condition, it will be activated, and its number is shown in the “Current Microphone ID” textbox. The
remaining test time will also be shown under the textbox. The system is testing the microphones according to the
microphone IDs, in ascending order.
Note: If the priority key is pressed, the microphone is unable to be tested .
41