Taiden HCS-4800 Series, Инструкция по установке и эксплуатации

Страница: 155 / 233

c. When the microphone is activated, it can be
turned off by pressing the microphone On/Off
key.

Active microphone number limitation (1~8)
reached
:
All other microphones cannot be activated unless
one of the active microphone
s
is turned off.
D. “Request” mode
a. Request to speak when the microphone On/Off
key is pressed (default 100 microphones at most,
set up the request microphone number limit at
DCS or web control ). The chairman unit can
approve or reject his/her speak;
b. When his/her request is approved, he/she can
speak and the last activated microphone will be
turn off at the same time.
E. “PTT” mode

Active microphone number limitation (1~8) NOT
reached
:
a. The microphone will be activated when the
microphone On/Off key is pressed and held, the
speaker can give his/her speech;
b. The microphone will be deactivated when the
microphone On/Off key is released.

Active microphone number limitation (1~8)
reached
:
Pressing the microphone On/Off key cannot
activate the microphone until one of the activated
microphones is switched off
.
A camera can focus an activated microphone
automatically (camera position preset by application
software). Speaker’s video can be exported to and
displayed on large screen(s).
4. Voting (for units with voting function)
Voting can be originated by TAIDEN conference
management system software. Supports 5 key
voting(table 3.11.1), The voting button indicating lights
of the congress unit start to blink; the delegate can
press the voting button to vote;

For “First key-press valid” voting, the delegate can
vote only once;

For “Last key-press valid” voting, the delegate can
change his/her vote, and the last voted key will be
valid.
5. Channel selection (for units with SI function)

When the CMU is connected to interpreter unit(s),
simultaneous interpretation function will work and
the channel selector will be activated. To use the
channel selector, an earphone must be plugged in.
When the earphone is plugged, the delegate can
select a suitable language to listen to by means of
the channel selector.
6. Volume control (for units with volume control
button)

The Vol headset button, can adjust the volume of
earphones.
7. VIP unit

Any delegate unit can be assigned as a VIP unit by
the TAIDEN conference management system
software. At most 32 VIP units can be assigned;
1.As long as the active microphone capacity is not
full, the microphone of the VIP unit can be
activated freely;
2.If the active microphone capacity is full, the
microphone of the VIP unit cannot be turned on
unless one of the active microphones is
deactivated.
Note:

Active microphone number(1~8) setting is only
effective to congress unit. The maximum
capacity is 8 units (including chairman unit and
VIP unit).
143