Taiden HCS-4800 Series, Инструкция по установке и эксплуатации

Страница: 136 / 233

3.8.2 Connection
3.8.2.1 Connecting to the CMU or the EMU
The HCS-4860/80 series congress unit is equipped
with a 1.5-meter 8P-DIN cable with a standard male
connector. When connecting the HCS-4800CMU/
HCS-8600EMU to the contribution units, just connect
the male connector of the first unit to the socket of the
CMU.
Figure 3.8.2 HCS-4860/80 series congress unit
connected to the CMU/EMU
For a longer distance between the contribution unit and
the CMU/EMU, a CBL8PS extension cable can be
used. One end of this cable is equipped with a 8P-DIN
male connector, the opposite end is equipped with a
female connector. Just connect the female connector of
the cable to the contribution unit, and connect the male
connector to the output of the main unit. The Cat5e
cable can also be used as an extension cable, one end
of the Cat5e cable is connected to output of the main
unit via the CBL8P2RJ45S converter cable; the other
end of the Cat5e cable is connected to the 8P-DIN
male connector of the contribution unit via the
CBL8S2RJ45S converter cable.
Figure 3.8.3 HCS-4860/80 series congress unit
connected to the CMU/EMU
Neither the replacement of congress units nor cable
faults between congress units will affect the other units
if “Closed Loop - Daisy Chain” connection topology is
selected. “Closed Loop - Daisy Chain” connection,
achieved by closing the loop of the daisy-chained units,
increases system reliability. To obtain “Closed Loop -
Daisy Chain” connection, just connect the last
congress unit back to the CMU or the EMU with a
CBL6PP extension cable (the cable features a
DIN-6PM connector at each end). In HCS-4800 series
system, the congress main unit can realize a “Closed
Loop - Daisy Chain” connection, but only one –
extension units do not offer this feature.
Figure 3.8.4 “Closed Loop - Daisy Chain” connection
between the CMU and HCS-4860/80 series congress
units
3.8.2.2 Connection between congress units
All congress units of HCS-4800 system are
daisy-chained easily and conveniently by dedicated
8P-DIN cables.
When connecting to another congress unit, just
connect the 8P-DIN standard female connector on the
0.6-meter cable of the unit to the 8P-DIN standard male
connector on the1.5-meter cable of the next unit.
123