Tadano TR-800XXL4 Скачать руководство пользователя страница 195

Страница: 195 / 402

K - 2

Air Conditioner

W701-0220E

[NOTICE]

◆

Operate the air conditioner after starting the engine.
Before stopping the engine, turn off the power
switch of the air conditioner.

◆

Do not place an obstructive object at the front of the
louvers.

◆

The compressor of the air conditioner stops during
outrigger operation and suspension lock operation.

Power switch

As this switch is pressed, the power to the air

conditioner is turned on or off repeatedly.

While the switch is on, signs are shown on the

liquid crystal display.

Air conditioner switch

This switch is used to start up the compressor and

to activate the cooling/dehumidification function.

As it is pressed, it is turned on or off repeatedly.

While the switch is on, the snow-shaped sign

appears on the display.

Inside/outside air selector switch

This switch is used to select air supply between

outside-cab air supply and air circulation inside

cab.

As it is pressed, the air supply changes between

outside-cab air supply and air circulation inside

cab repeatedly.

The current air supply is shown on the display.

Air flow switches

These switches are used to select air flow volume

among four steps.

The current volume is shown on the display.

Temperature control switches

These switches are used to adjust the

temperature of the air from the air conditioner

among eight steps.

The current temperature is shown by the bargraph

on the display.

Air outlet changeover switch

This switch is used to select the air blowing

direction. As it is pressed, the direction changes

Face Face and foot Foot in sequence

repeatedly.

The current direction is shown on the display.

Defroster switch

This switch is used to set the air flow coming out

of the defroster.

To cancel the defroster mode, press this switch

again or press the air outlet changeover switch.

The air flows will come out in the direction last

selected.

While the defroster is used, the corresponding

sign is shown on the display.

While the engine and the air conditioner are

running, be sure not to touch the rotating
objects (fan belt, condenser fan, etc).

WARNING

Содержание TR-800XXL4



















































































































































































































































































































































































































Результаты поиска

Содержание TR-800XXL4

Отзывы:

Похожие инструкции для TR-800XXL4

Бренды по названию

Популярные бренды

Tadano TR-800XXL4, Руководство по обслуживанию

Результаты поиска

Содержание TR-800XXL4

Отзывы:

Похожие инструкции для TR-800XXL4

Бренды по названию

Популярные бренды