Tadano GR-500EXL-3, Руководство по обслуживанию

Страница: 44 / 161

Y-5 Y-5
Adjusting Procedure (Electric)
31
WY04-2290E
7. Over-front detection switch (CN521)
Fully retract the boom and slewing it to the over-front.
Insert the slewing lock pin and set the boom angle to
0°. Then, adjust the switch position so that the
dimension A becomes 2.5
0
–0.5
mm (0.10
0
–0.02
in).
(*1): • Apply a thread locking agent (ThreeBond 1401
or the equivalent) to the threaded section of
the switch.
• Switch fixing nut tightening torque
: 19 to 20 N-m (193 to 204 kgf-cm)
(14 to 14.8 ft-lbf)
[NOTICE]

Make sure that the green LED lights up when the
switch is activated.
8. Straight ahead detection switch
(CN408)
Set the rear wheels in a straight-forward position,
and adjust the switch position so that the dimension
A becomes 3
0
–0.5
mm (0.12
0
–0.02
in).
(*1): • Apply a thread locking agent (ThreeBond 1401
or the equivalent) to the threaded section of
the switch.
• Switch fixing nut tightening torque
: 19 to 20 N-m (193 to 204 kgf-cm)
(14 to 14.8 ft-lbf)
[NOTICE]

Make sure that the green LED lights up when the
switch is activated.
△
0
343-731-10000
△
0
349-610-00000