Tachosys digidl, Руководство по установке

Страница: 25 / 28

DigiDL Installation Guide Page - 25
WIFI connectivity issues
The Blue LED will shine constantly if you have a solid connection to WIFI. Please bear in mind that
WIFI settings are generally case sensitive this certainly applies to the SSID and Password in
particular. In order to have WIFI connection you must be in range of your WIFI router, in ‘line of
sight’ preferably. Signal issues may be resolved by fitting a more powerful aerial to the router and/
or the digiDL.
GPRS connectivity issues
If the Blue LED is flashing it means that a SIM card is present however the unit is unable to initiate
communication with the GPRS network. A slow flash at around 1 per second means that the APN is
likely wrong or the SIM is not active for data. A faster blue flash at 2 per second suggests that the
SIM is working and the APN is correct however the URL set in the unit may be incorrect, the server
may not be available or the unit may not be registered with the provider.
Initially check all of your GPRS settings (see Page 18). If the unit still fails to connect first try
repowering the unit. If the unit still fails then you can view the status of connectivity in the digiDL
Configuration Status window. The code displayed will show the stage of connection.
You should check the SIM contract allows you to pass Internet data. This is often termed a ‘data
enabled SIM’.
Green LED flashing or OFF
You may not have a connection to CAN2. This could be caused by one of the following;
1. Ignition is OFF.
2. The secondary CAN is not enabled (see page 22).
3. The Tachograph is too old or of the wrong type (see page 4).
4. The cabling is faulty. Try another loom.
Troubleshooting