Tachosys digidl, Руководство по установке

Страница: 11 / 28

DigiDL Installation Guide Page - 11
digiDL - Installation
Cable form supplied with digiDL
digiDL with cable form in place
Please Note: The Speed sensor connection remains in the Tachograph Socket B, this is not shown.
You have to remove the existing plug A from socket A of the Tachograph. The plug you removed
from socket A must be placed in the new socket clearly visible at the top of
Fig 4
..
digiDL Power; place in
socket A at the rear of
the Tachograph.
Replace existing cable.
CAN-Bus A socket;
Provides a new “piggy
back” connector for
the cable removed
from connection A of
the Tachograph.
CAN-Bus C;
Place in socket C
of Tachograph. digiDL CAN + PWR;
Place in digiDL
socket 2.
New Socket A
for the
original plug A
at the rear of
the
Tachograph.
Fig 4.
Fig 3.