Tachosys digidl, Руководство по установке

Страница: 15 / 28

DigiDL Installation Guide Page - 15
DigiDL Configuration Windows® Software
Connecting the digiDL to your PC
1.
Connect the standard USB cable supplied, to a free USB socket on your PC. The end of the USB
cable as shown in
Fig 8.
should be connected to the socket on the back of the USB digidock
shown in
Fig 9.
2.
Insert the oval connector of the digiDL configuration cable provided, into the top of the
digidock. Connect the opposite end to the AUX socket (1) of the digiDL (see
Fig 1
.). There is
only one way the cable can be connected.
3.
Your digiDL must be powered for configuration purposes. Please use the power supply
provided or power via the Tachograph and the supplied loom cable.
4.
Once all connections are made you may either re-open the digiDL Configuration application,
click the Retry button displayed or follow the on screen instructions provided, depending on
the stage you were at in the connection process.
If you are having problems connecting to your digiDL then repeat the steps above.
Fig 8.
Fig 9.