TAC Xenta 555, Инструкция к добавке, Страница: 37 / 82

TAC Xenta 555, Supplement Manual 5 Creating a MicroNet Network in TAC XBuilder
TAC AB, Oct 2006 37 (82)
04-00054-01-en
3
Expand the Micronet 1 object (or the renamed object) and verify
that your project now contains imported MicroNet network objects
(subnets, controllers and so on) and point signals.
4
Note the parameters of the highlighted Micronet 1 object. You
may need to set its parameters as described in Chapter 6, “Setting
Up MicroNet Communications Parameters”, on page 39.
Note
The Online Status point signal will always be added to your
selected signals. The Null Outputs point signal will be present
for MN, MN50 Series and IAC controllers, but not Unifact Pro,
Bonsai or MMC controllers (see Section 9.3.1, “MicroNet Point
Signal Attributes”, on page 65 for a description of these point
signals).