TAC Xenta 555, Инструкция к добавке, Страница: 38 / 82

5 Creating a MicroNet Network in TAC XBuilder TAC Xenta 555, Supplement Manual
38 (82) TAC AB, Oct 2006
04-00054-01-en
5.4 Updating Your Project with a New MicroNet XML
File
Modifications within your MicroNet system such as adding or deleting
points and point extensions will cause XML files to change. If changes
occur in any of the MicroNet XML files that you have already imported
into your project, you must update your project so that it accurately rep-
resents the modified MicroNet network. You can insert the new one
directly, in which case you will be prompted to delete the old one first,
or you can delete the old network first and then insert the new one.
To update the network in your project
1
Follow the steps detailed in Section 5.3, “Creating a MicroNet
Network from an XML File”, on page 36.
If you did not delete the old MicroNet network first, you will be
prompted to do so in the following dialog box.
2
Click Yes to replace the old network with another network.
3
Expand the Micronet 1 object and verify that your project now
contains updated MicroNet network objects.
To delete the network in your project
1
Right-click the Micronet 1 object and then click Delete .
2
Click Yes in the resulting confirmation dialog box.
The whole MicroNet network will be deleted from the project.